boostbysmith.com - Products: Multi-Stage Boost Controllers

Hayabusa Plug and Play Harlan LED Shift Lights
	I purchase standard Harlan shift lights and modify them to be plug and play on your Hayabusa. I extend the leads using nice wire loom, add a Suzuki OE 2 pin connector that plugs in under the nose near the right turn signal, pre-wire the tach signal with a spade connector and a scotch lock, simply find the yellow wire with blue tracer in the taped up Suzuki harness on the left hand side of the bike and clamp it on. A mounting strap is also included. I supply Hayabusa specific directions on CD in addition to the Suzuki Hayabusa Service Manual. Shift :Lights are adjustable in 100 RPM increments from 500-12,000 RPM. Special order fro 3000-15,700 adjustability is available just email please. Colors Available: Red, Orange, Yellow, Green ($65 + Shipping) Blue $81 + Shipping ($16 additional for Blue LEDs)

BoostBySmith Dual-Purpose Launch & Shift Lights
	Introducing the new BoostBySmith Dual-Purpose Launch / Shift Light. The LED cluster can be mounted on top of your existing gauges, on a convenient bracket like in the photo. This LED cluster is very bright and comes in blue, red, orange, green. Both the Launch Light and Shift Light are displayed as the same color. The launch light is only active when the clutch lever is pulled in. 3,000-15,700 RPM in 100 RPM increments. The Launch light has an adjustable upper window to de-activate the light if you rev too high on the starting line.
	Plug and Play operation is available for the Suzuki Hayabusa. Power and ground come from a Suzuki OE 2 pin connector located under the nose, simply plug it in. The tach signal wire and clutch signal wire can be tapped into using the prewired spade connector along with a scotch lock connector, simply push the connector together. The relay for the clutch switch comes pre-wired as well. Optional: If you currently have an air or Co2 shifter on your motorcycle, I can wire up your shift light to trigger the air shifter for an auto-shift feature for an additional $10. I haven't been able to re-produce the issue, but have had some customers say that when using a MPS killbox that they experience very long KILL times when using autoshift. This has never been an issue when using a CYCLE-TEK kill box, this is just a warning, if you have a MPS Box and this becomes an issue you will need to replace the kill box with a cycle-tek unit. PRICE without Autoshift Output: $105.00 + Shipping ($5 in the USA) PRICE with Autoshift Output: $115.00 + Shipping ($5 in the USA)**
	International Orders Welcome, please email for shipping costs. For custom orders or for questions: sales@boostbysmith.com

Modify Website